Кришка розширювального бачка 
Розширювальний бачок 
Термостат 
Помпа (водяний насос) 
Радіатор охолодження двигуна 
Кришка радіатора 
Вентилятор системи охолодження двигуна Помпа (водяний насос) для VW CADDY II Автофургон / микроавтобус (9K9A) 1.9 SDI
Фільтр
Сортувати
UAH
- Supplementary Article/Info 2
- without lid
- reinforced version
- Weight [kg]
- 1.02 kg
- Supplementary Article/Info 2
- with lid
- reinforced version
- Weight [kg]
- 2 kg
- Number of Teeth
- 19
- Weight [kg]
- 0.74 kg
- Number of belts
- 1
- Weight [kg]
- 2.6 kg
- Length [mm]
- 1,334 mm
- Number of Teeth
- 141
- Width [mm]
- 25 mm
- Tooth Pitch [mm]
- 9.525 mm
- Packaging length [cm]
- 28 cm
- Packaging width [cm]
- 17.5 cm
- Packaging height [cm]
- 31 cm
- Weight [kg]
- 2.639 kg
- Supplementary Article/Info 2
- with lid
- Operating Mode
- Mechanical
- Packaging length [cm]
- 28 cm
- Packaging width [cm]
- 17.5 cm
- Packaging height [cm]
- 24 cm
- Weight [kg]
- 1.922 kg
- Supplementary Article/Info 2
- without lid
- Operating Mode
- Mechanical
- Supplementary Article/Supplementary Info
- with gasket/seal
- Packaging length [cm]
- 19.5 cm
- Packaging width [cm]
- 18.2 cm
- Packaging height [cm]
- 18.7 cm
- Number of Teeth
- 141
- Weight [kg]
- 2.439 kg
- Width [mm]
- 25 mm
- Weight [kg]
- 0.785 kg
- Packaging length [cm]
- 13 cm
- Packaging width [cm]
- 13 cm
- Packaging height [cm]
- 16 cm
- Supplementary Article/Supplementary Info
- with gasket/seal
- Weight [kg]
- 1.66 kg
- Packaging length [cm]
- 20 cm
- Packaging width [cm]
- 15 cm
- Packaging height [cm]
- 22.5 cm
- Supplementary Article/Supplementary Info
- with gasket/seal
- Operating Mode
- Mechanical
- Supplementary Article/Info 2
- with lid
- Weight [kg]
- 0.857 kg
- Packaging length [cm]
- 13 cm
- Packaging width [cm]
- 13 cm
- Packaging height [cm]
- 16 cm
- Supplementary Article/Supplementary Info
- with gasket/seal
- Operating Mode
- Mechanical
- Supplementary Article/Info 2
- without lid
- Pulleys
- without belt pulley
- Housing Type
- without housing
- Weight [kg]
- 0.87 kg
- reinforced version
- Pulleys
- without belt pulley
- Housing Type
- with housing
- Height [mm]
- 73.4 mm
- Weight [kg]
- 1.71 kg
- reinforced version
- Pulleys
- with belt pulley
- Number of Teeth
- 19
- Number of Teeth
- 141
- Width [mm]
- 25 mm
- Number of belts
- 1
- Weight [kg]
- 2.73 kg
- for article number
- A187
- Number of Teeth
- 141
- Width [mm]
- 25 mm
- Number of belts
- 1
- Weight [kg]
- 2.73 kg
- for article number
- A187
- Water pump impeller material
- Metal
- Seal Material
- Paper
- Material
- Cast Aluminium
- Number of blades/vanes
- 6
- Weight [kg]
- 0.787 kg
- Supplementary Article/Supplementary Info
- with seal rings
- Observe service information
- Water pump impeller material
- Plastic
- Seal Material
- Rubber
- Hub Outer Diameter [mm]
- 30 mm
- Material
- Cast Aluminium
- Number of blades/vanes
- 6
- Weight [kg]
- 1.568 kg
- Supplementary Article/Supplementary Info
- with gaskets/seals
- for OE number
- 037 121 010 C
- Observe service information
- Width [mm]
- 25 mm
- Number of Teeth
- 137
- Surface
- Coated
- Belts
- with rounded tooth profile
- Weight [kg]
- 1.088 kg
- for OE number
- 028 198 119 A S1
- Water pump impeller material
- Plastic
- Seal Material
- Rubber
- Material
- Cast Aluminium
- Number of Teeth
- 19
- Number of blades/vanes
- 7
- Weight [kg]
- 0.741 kg
- Supplementary Article/Info 2
- with seal ring
- Observe service information
- Water pump impeller material
- Plastic
- Number of Teeth
- 141
- Supplementary Article/Supplementary Info
- with fastening/mounting material
- Belts
- with rounded tooth profile
- Weight [kg]
- 1.1 kg
- for OE number
- 038 109 119 D S1
- Observe service information
- Number of Teeth 1
- 141
- Width 1 [mm]
- 25 mm
- Operating Mode
- Mechanical
- reinforced version
- Supplementary Article/Supplementary Info
- do not use sealant
- Supplementary Article/Info 2
- without lid
- Number of blades/vanes
- 6
- Impeller Diameter [mm]
- 58.65 mm
- Water Pump Type
- for V-ribbed belt use
- Water pump impeller material
- Metal
- Operating Mode
- Mechanical
- reinforced version
- Supplementary Article/Supplementary Info
- do not use sealant
- Supplementary Article/Info 2
- with seal ring
- Number of blades/vanes
- 6
- Impeller Diameter [mm]
- 58.65 mm
- Water Pump Type
- for V-ribbed belt use
- Water pump impeller material
- Metal
- Operating Mode
- Mechanical
- Supplementary Article/Supplementary Info
- do not use sealant
- Supplementary Article/Info 2
- without lid
- Number of blades/vanes
- 6
- Impeller Diameter [mm]
- 58.65 mm
- Water Pump Type
- for V-ribbed belt use
- Water pump impeller material
- Metal
- Operating Mode
- Mechanical
- Supplementary Article/Supplementary Info
- do not use sealant
- Supplementary Article/Info 2
- with seal ring
- Number of blades/vanes
- 6
- Impeller Diameter [mm]
- 58.65 mm
- Water Pump Type
- for V-ribbed belt use
- Water pump impeller material
- Metal
- Number of Teeth
- 19
- Operating Mode
- Mechanical
- Supplementary Article/Supplementary Info
- do not use sealant
- Supplementary Article/Info 2
- with seal ring
- Number of blades/vanes
- 7
- Water Pump Pulley Diameter [mm]
- 56.03 mm
- Impeller Diameter [mm]
- 64 mm
- Water Pump Type
- for timing belt drive
- Water pump impeller material
- Metal
HEPU
P512
Water Pump, engine cooling
Рекомендуємо
- Operating Mode
- Mechanical
- Housing Type
- single-part housing
- Supplementary Article/Supplementary Info
- with gasket/seal
- Water pump impeller material
- Metal
- for article number
- P513
HEPU
P512S
Water Pump, engine cooling
Рекомендуємо
- Operating Mode
- Mechanical
- Supplementary Article/Supplementary Info
- with gasket/seal
- Housing Type
- single-part housing
- Water pump impeller material
- Metal
- Alternatively
- reinforced version
HEPU
P513
Water Pump, engine cooling
Рекомендуємо
- Operating Mode
- Mechanical
- Housing Type
- with housing
- Water pump impeller material
- Metal
- Supplementary Article/Supplementary Info
- with seal rings
HEPU
P513G
Housing, water pump
Рекомендуємо
- Operating Mode
- Mechanical
- Supplementary Article/Supplementary Info
- Incl. Gasket Set
- Supplementary Article/Info 2
- with screw set
HEPU
P513S
Water Pump, engine cooling
Рекомендуємо
- Operating Mode
- Mechanical
- Supplementary Article/Supplementary Info
- with gaskets/seals
- Housing Type
- with housing
- Water pump impeller material
- Metal
- reinforced version
- Alternatively
HEPU
P549
Water Pump, engine cooling
Рекомендуємо
- Operating Mode
- Mechanical
- Supplementary Article/Supplementary Info
- with gasket/seal
- Number of Teeth
- 19
- Impeller Diameter [mm]
- 64 mm
- Water pump impeller material
- Metal
- Number of blades/vanes
- 7
HEPU
PK05122
Water Pump & Timing Belt Kit
Рекомендуємо
- Number of belts
- 1
- Width [mm]
- 25 mm
- Number of Teeth
- 137
- Pulleys contained
- 2
- Alternatively
HEPU
PK05127
Water Pump + V-Ribbed Belt Kit
Рекомендуємо
- Housing Type
- single-part housing
- Number of belts
- 1
- Length [mm]
- 1,145 mm
- Number of ribs
- 6
- Pulleys contained
- 2
- Driven Units
- Power steering pump
- Tensioner Pulley Actuation
- Automatic
HEPU
PK05128
Water Pump + V-Ribbed Belt Kit
Рекомендуємо
- Housing Type
- single-part housing
- Number of belts
- 1
- Length [mm]
- 1,045 mm
- Number of ribs
- 6
- Pulleys contained
- 2
- Driven Units
- Power steering pump
- Tensioner Pulley Actuation
- Automatic
HEPU
PK05132
Water Pump & Timing Belt Kit
Рекомендуємо
- Number of belts
- 1
- Width [mm]
- 25 mm
- Number of Teeth
- 137
- Pulleys contained
- 2
- Alternatively
- for components see parts list
HEPU
PK05137
Water Pump + V-Ribbed Belt Kit
Рекомендуємо
- Housing Type
- two-piece housing
- Number of belts
- 2
- Length [mm]
- 1,145 mm
- Number of ribs
- 6
- Pulleys contained
- 2
- Driven Units
- Power steering pump
- Tensioner Pulley Actuation
- Automatic
HEPU
PK05138
Water Pump + V-Ribbed Belt Kit
Рекомендуємо
- Housing Type
- two-piece housing
- Number of belts
- 2
- Length 1 [mm]
- 1,045 mm
- Number of ribs
- 6
- Length 2 [mm]
- 730 mm
- Pulleys contained
- 2
- Driven Units
- Power steering pump
- Tensioner Pulley Actuation
- Automatic
HEPU
PK05491
Water Pump & Timing Belt Kit
Рекомендуємо
- Number of belts
- 1
- Width [mm]
- 25 mm
- Number of Teeth
- 141
- Pulleys contained
- 4
- Operating Mode
- Mechanical
- Water pump impeller material
- Metal
- Supplementary Article/Supplementary Info
- with gasket/seal
- Operating Mode
- Mechanical
- Water pump impeller material
- Metal
- Supplementary Article/Supplementary Info
- with roof rails
- Supplementary Article/Info 2
- without lid
METELLI
24-0279
Water Pump, engine cooling
Рекомендуємо
- Operating Mode
- Mechanical
- Supplementary Article/Supplementary Info
- do not use sealant
- Supplementary Article/Info 2
- without lid
- Number of blades/vanes
- 6
- Impeller Diameter [mm]
- 58.65 mm
- Water Pump Type
- for V-ribbed belt use
- Water pump impeller material
- Metal
METELLI
24-0579
Water Pump, engine cooling
Рекомендуємо
- Operating Mode
- Mechanical
- Supplementary Article/Supplementary Info
- do not use sealant
- Supplementary Article/Info 2
- with seal ring
- Number of blades/vanes
- 6
- Impeller Diameter [mm]
- 58.65 mm
- Water Pump Type
- for V-ribbed belt use
- Water pump impeller material
- Metal
METELLI
24-0731
Water Pump, engine cooling
Рекомендуємо
- Number of Teeth
- 19
- Operating Mode
- Mechanical
- Supplementary Article/Supplementary Info
- do not use sealant
- Supplementary Article/Info 2
- with seal ring
- Number of blades/vanes
- 7
- Water Pump Pulley Diameter [mm]
- 56.03 mm
- Impeller Diameter [mm]
- 64 mm
- Water Pump Type
- for timing belt drive
- Water pump impeller material
- Metal
METELLI
24-1104
Water Pump, engine cooling
Рекомендуємо
- Operating Mode
- Mechanical
- reinforced version
- Supplementary Article/Supplementary Info
- do not use sealant
- Supplementary Article/Info 2
- without lid
- Number of blades/vanes
- 6
- Impeller Diameter [mm]
- 58.65 mm
- Water Pump Type
- for V-ribbed belt use
- Water pump impeller material
- Metal
METELLI
24-1105
Water Pump, engine cooling
Рекомендуємо
- Operating Mode
- Mechanical
- reinforced version
- Supplementary Article/Supplementary Info
- do not use sealant
- Supplementary Article/Info 2
- with seal ring
- Number of blades/vanes
- 6
- Impeller Diameter [mm]
- 58.65 mm
- Water Pump Type
- for V-ribbed belt use
- Water pump impeller material
- Metal
METELLI
30-0731-1
Water Pump & Timing Belt Kit
Рекомендуємо
- Number of Teeth 1
- 141
- Width 1 [mm]
- 25 mm
- Supplementary Article/Supplementary Info
- with gasket/seal
- Housing Type
- without housing
- for shaft diameter [mm]
- 30 mm
- New part without deposit
- Article number of the recommended special tool
- 999 990 0002
- Supplementary Article/Supplementary Info
- with gasket/seal
- Housing Type
- with housing
- for shaft diameter [mm]
- 30 mm
- New part without deposit
- Article number of the recommended special tool
- 999 990 0002
- Supplementary Article/Supplementary Info
- with gasket/seal
- Water Pump Type
- for timing belt drive
- Number of Teeth
- 19
- Quality
- Sealed with SiC/SiC
- New part without deposit
- Article number of the recommended special tool
- 999 990 0002
- Number of Teeth
- 141
- Length [mm]
- 1,343 mm
- Width [mm]
- 25 mm
- Driven Units
- Camshaft
- Number of belts
- 1
- Pulleys contained
- 4
- Pulleys
- without belt pulley
- Housing Type
- without housing
- Supplementary Article/Supplementary Info
- with gaskets/seals
- Impeller Diameter [mm]
- 60 mm
- Thread Size
- M8
- Number of threaded holes
- 3
- Number of Gaskets/Seals/Seal Rings
- 3
- Pulleys
- without belt pulley
- Housing Type
- without housing
- Supplementary Article/Supplementary Info
- with gasket/seal
- Impeller Diameter [mm]
- 60 mm
- Thread Size
- M8
- Bearing Type
- Roller Bearing
- Number of threaded holes
- 3
- Housing Type
- with housing
- Supplementary Article/Supplementary Info
- with gaskets/seals
- Impeller Diameter [mm]
- 60 mm
- Thread Size
- M8
- Number of threaded holes
- 3
- Number of Gaskets/Seals/Seal Rings
- 2
- Housing Type
- with housing
- reinforced version
- Supplementary Article/Supplementary Info
- with gaskets/seals
- Impeller Diameter [mm]
- 60 mm
- Thread Size
- M8
- Bearing Type
- Roller Bearing
- Number of threaded holes
- 3
- Number of Gaskets/Seals/Seal Rings
- 2
- Number of Teeth
- 19
- Pulleys
- with belt pulley
- Supplementary Article/Supplementary Info
- with gasket/seal
- Impeller Diameter [mm]
- 63.5 mm
- Belt Pulley Ø [mm]
- 56.2 mm
- Number of Teeth
- 141
- Width [mm]
- 26 mm
- Supplementary Article/Supplementary Info
- with fastening/mounting material
- Number of Teeth
- 141
- Width [mm]
- 26 mm
- Supplementary Article/Supplementary Info
- with fastening/mounting material
PIERBURG
7.07152.46.0
Water Pump, engine cooling
Рекомендуємо
- Operating Mode
- Mechanical
- Water pump impeller material
- Metal
- Impeller Diameter [mm]
- 59.5 mm
- Number of blades/vanes
- 6
- Supplementary Article/Supplementary Info
- with gasket/seal
- Supplementary Article/Info 2
- without coolant regulator
- Number of Teeth
- 141
- Width [mm]
- 25 mm
- Driven Units
- incl. water pump
- Supplementary Article/Info 2
- with belt
- Supplementary Article/Info 2
- without lid
- Operating Mode
- Mechanical
- Supplementary Article/Info 2
- without lid
- reinforced version
- Operating Mode
- Mechanical
- Supplementary Article/Info 2
- with lid
- Operating Mode
- Mechanical
- Supplementary Article/Info 2
- with lid
- reinforced version
- Operating Mode
- Mechanical
- Belt Pulley Ø [mm]
- 56.2 mm
- Number of Teeth
- 19
- Impeller Diameter [mm]
- 63.5 mm
- Operating Mode
- Mechanical
- Number of Teeth
- 141
- Width [mm]
- 25 mm
- Driven Units
- incl. water pump
- Supplementary Article/Info 2
- with belt
- Supplementary Article/Info 2
- without lid
- Operating Mode
- Mechanical
- Supplementary Article/Info 2
- without lid
- reinforced version
- Operating Mode
- Mechanical
- Supplementary Article/Info 2
- with lid
- Operating Mode
- Mechanical
- Supplementary Article/Info 2
- with lid
- reinforced version
- Operating Mode
- Mechanical
- Belt Pulley Ø [mm]
- 56.2 mm
- Number of Teeth
- 19
- Impeller Diameter [mm]
- 63.5 mm
- Operating Mode
- Mechanical
- Number of Teeth 1
- 141
- Width 1 [mm]
- 25 mm
- Observe service information
- Follow installation instructions
- SVHC
- No SVHC present!
- Number of Teeth 1
- 137
- Width 1 [mm]
- 25 mm
- Observe service information
- Follow installation instructions
- SVHC
- No SVHC present!
- Number of Teeth 1
- 137
- Width 1 [mm]
- 25 mm
- Observe service information
- Follow installation instructions
- SVHC
- No SVHC present!
- Water Pump Type
- for timing belt drive
- Number of Teeth
- 19
- SVHC
- No SVHC present!
- Water Pump Type
- for V-ribbed belt use
- Supplementary Article/Supplementary Info
- with gasket/seal
- Housing Type
- without housing
- Number of threaded holes
- 3
- SVHC
- No SVHC present!
- Housing Type
- with housing
- SVHC
- No SVHC present!
- Number of bolts/screws
- 2
- Water pump impeller material
- Plastic
- Belt Width [mm]
- 25 mm
- Supplementary Article/Info 2
- with studs
- Number of Teeth
- 141
- Belts
- with trapezoidal tooth profile
- Length [mm]
- 1,045 mm
- Width [mm]
- 21.36 mm
- Belt Material
- EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Number of ribs
- 6
- Supplementary Article/Supplementary Info
- with gaskets/seals
- Length 2 [mm]
- 720 mm
- SVHC
- No SVHC present!
- Length [mm]
- 1,145 mm
- Width [mm]
- 21.36 mm
- Belt Material
- EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Number of ribs
- 6
- Supplementary Article/Supplementary Info
- with gaskets/seals
- Length 2 [mm]
- 790 mm
- SVHC
- No SVHC present!
- Water Pump Type
- for V-ribbed belt use
- Number of bolts/screws
- 8
- Water pump impeller material
- Sheet Steel
- Housing Type
- with housing
- Supplementary Article/Supplementary Info
- with gaskets/seals
- Water Pump Type
- for V-ribbed belt use
- Water pump impeller material
- Sheet Steel
- Supplementary Article/Supplementary Info
- with gaskets/seals
- Water Pump Type
- for timing belt drive
- Water pump impeller material
- Plastic
- Supplementary Article/Supplementary Info
- with gaskets/seals
- Number of Teeth
- 19
- Water pump impeller material
- Plastic
- Seal Material
- Rubber
- Material
- Cast Aluminium
- Number of Teeth
- 19
- Number of blades/vanes
- 7
- Weight [kg]
- 0.5 kg
- Supplementary Article/Info 2
- with seal ring
- Observe service information
- Water pump impeller material
- Plastic
- Number of Teeth
- 141
- Supplementary Article/Supplementary Info
- with fastening/mounting material
- Belts
- with rounded tooth profile
- Weight [kg]
- 1.1 kg
- for OE number
- 038 109 119 D S1
- Observe service information
- new version
- Water pump impeller material
- Metal
- Seal Material
- Paper
- Material
- Cast Aluminium
- Number of blades/vanes
- 6
- Weight [kg]
- 0.787 kg
- Supplementary Article/Supplementary Info
- with seal rings
- Observe service information
- Water pump impeller material
- Plastic
- Seal Material
- Rubber
- Hub Outer Diameter [mm]
- 30 mm
- Material
- Cast Aluminium
- Number of blades/vanes
- 6
- Weight [kg]
- 1.568 kg
- for OE number
- 037 121 010 C
- Supplementary Article/Supplementary Info
- with gaskets/seals
- Observe service information
- Width [mm]
- 25 mm
- Number of Teeth
- 137
- Surface
- Coated
- Belts
- with rounded tooth profile
- Weight [kg]
- 1.088 kg
- for OE number
- 028 198 119 A S1
- Supplementary Article/Supplementary Info
- with water pump
- Observe technical data
- Water pump impeller material
- Plastic
- Supplementary Article/Supplementary Info
- with gasket/seal
- Supplementary Article/Info 2
- with seal ring
- Operating Mode
- Mechanical
- Water pump impeller material
- Metal
- Operating Mode
- Mechanical
- Housing Type
- with housing
- Supplementary Article/Supplementary Info
- with gasket/seal
- Supplementary Article/Supplementary Info
- with gasket/seal
- Operating Mode
- Mechanical
- Number of Teeth
- 18
- Water pump impeller material
- Metal
- Operating Mode
- Mechanical
- for OE number
- 068 121 005 C
- Water pump impeller material
- Metal
- Housing Type
- without housing
- Supplementary Article/Supplementary Info
- with gasket/seal
- Water pump impeller material
- Metal
- Operating Mode
- Mechanical
- Supplementary Article/Info 2
- with seal ring
- Diameter 2 [mm]
- 130 mm
- Operating Mode
- Mechanical
- Water pump impeller material
- Plastic
- Housing Type
- without housing
- Supplementary Article/Info 2
- with seal ring
- Diameter 1 [mm]
- 125 mm
- Length [mm]
- 185 mm
- Diameter 2 [mm]
- 115 mm
- Length [mm]
- 180 mm
- Housing Type
- without housing
- Supplementary Article/Supplementary Info
- without accessories
- Supplementary Article/Info 2
- with seal ring
- Diameter 1 [mm]
- 110 mm
- Operating Mode
- Mechanical
- Water pump impeller material
- Metal
- Supplementary Article/Supplementary Info
- with gaskets/seals
- Operating Mode
- Mechanical
- Water pump impeller material
- Metal
- Length [mm]
- 335 mm
- Width [mm]
- 170 mm
- Height [mm]
- 170 mm
- Supplementary Article/Supplementary Info
- with gasket/seal
- Operating Mode
- Mechanical
- Water pump impeller material
- Metal
- Supplementary Article/Info 2
- with seal ring
- Operating Mode
- Mechanical
- Water pump impeller material
- Metal
- Supplementary Article/Supplementary Info
- with accessories
- Width [mm]
- 145 mm
- Operating Mode
- Mechanical
- Water pump impeller material
- Metal
- Length [mm]
- 125 mm
- Height [mm]
- 200 mm
- Supplementary Article/Info 2
- with seal ring
- Operating Mode
- Mechanical
- Supplementary Article/Supplementary Info
- with gaskets/seals
- Water pump impeller material
- Metal
- Observe the vehicle manufacturer specifications
- Supplementary Article/Supplementary Info
- without accessories
- Supplementary Article/Info 2
- with seal ring
- Operating Mode
- Mechanical
- Water pump impeller material
- Metal
- Supplementary Article/Info 2
- with seal ring
- Length [mm]
- 330 mm
- Height [mm]
- 200 mm
- Width [mm]
- 190 mm
- Operating Mode
- Mechanical
- Supplementary Article/Supplementary Info
- without accessories
- Number of Teeth
- 21
- Operating Mode
- Mechanical
- Water pump impeller material
- Metal
- Supplementary Article/Supplementary Info
- with gasket/seal
- Operating Mode
- Mechanical
- Supplementary Article/Info 2
- with seal ring
- Water pump impeller material
- Metal
- Supplementary Article/Supplementary Info
- with gaskets/seals
- Pulleys
- without belt pulley
- Supplementary Article/Info 2
- with lid
- Supplementary Article/Supplementary Info
- with gaskets/seals
- reinforced version
- Weight [kg]
- 1.87 kg