Кришка розширювального бачка 
Розширювальний бачок 
Термостат 
Помпа (водяний насос) 
Радіатор охолодження двигуна 
Кришка радіатора 
Вентилятор системи охолодження двигуна Помпа (водяний насос) для VW MULTIVAN V (7HM, 7HN, 7HF, 7EF, 7EM, 7EN) 2.0 TDI
Фільтр
Сортувати
UAH
- Number of belts
- 1
- Weight [kg]
- 2.77 kg
- Voltage [V]
- 12 V
- Pressure [bar]
- 0.15 bar
- Flow rate [l/h]
- 500 l/h
- Voltage [V]
- 12 V
- Pressure [bar]
- 0.1 bar
- Flow rate [l/h]
- 730 l/h
- Voltage [V]
- 12 V
- Pressure [bar]
- 0.15 bar
- Flow rate [l/h]
- 500 l/h
- Length [mm]
- 1,524 mm
- Number of Teeth
- 160
- Width [mm]
- 25 mm
- Tooth Pitch [mm]
- 9.525 mm
- Pulleys contained
- 4
- Packaging length [cm]
- 19.5 cm
- Packaging width [cm]
- 18.2 cm
- Packaging height [cm]
- 18.7 cm
- Number of Teeth
- 160
- Weight [kg]
- 2.622 kg
- Width [mm]
- 25 mm
- Supplementary Article/Supplementary Info
- with camshaft screws
- Packaging length [cm]
- 19.5 cm
- Packaging width [cm]
- 18.2 cm
- Packaging height [cm]
- 18.7 cm
- Weight [kg]
- 2.752 kg
- Width 1 [mm]
- 25 mm
- Width 2 [mm]
- 9.2 mm
- 2 Belts
- Number of Teeth 2
- 59
- Number of Teeth 1
- 160
- Supplementary Article/Supplementary Info
- with camshaft screws
- Engine Timing
- Timing belt in the oil bath
- Weight [kg]
- 0.722 kg
- Packaging length [cm]
- 13 cm
- Packaging width [cm]
- 13 cm
- Packaging height [cm]
- 16 cm
- Weight [kg]
- 0.5 kg
- Packaging height [cm]
- 16 cm
- Packaging width [cm]
- 13 cm
- Packaging length [cm]
- 13 cm
- Operating Mode
- Electric
- Weight [kg]
- 0.455 kg
- Packaging height [cm]
- 16 cm
- Packaging width [cm]
- 13 cm
- Packaging length [cm]
- 13 cm
- Operating Mode
- Electric
- Belt Pulley Ø [mm]
- 56 mm
- Height 1 [mm]
- 28.5 mm
- Weight [kg]
- 1.1 kg
- reinforced version
- Model Year from
- 2009
- Manufacturer Restriction
- PIERBURG
- Operating Mode
- Electric
- Number of Teeth
- 160
- Width [mm]
- 25 mm
- Number of belts
- 1
- Weight [kg]
- 2.28 kg
- for article number
- A224
- Number of Teeth
- 160
- Width [mm]
- 25 mm
- Number of belts
- 1
- Weight [kg]
- 2.28 kg
- for article number
- A224
- Number of Teeth
- 59
- Number of belts
- 2
- for article number
- A224
- Water pump impeller material
- Plastic
- Seal Material
- Rubber
- Material
- Cast Aluminium
- Number of Teeth
- 19
- Number of blades/vanes
- 8
- Weight [kg]
- 0.725 kg
- Supplementary Article/Supplementary Info
- with gasket/seal
- Observe service information
- Width [mm]
- 25 mm
- Number of Teeth
- 160
- Surface
- Coated
- Belts
- with rounded tooth profile
- Weight [kg]
- 2.63 kg
- for OE number
- 03L 198 119 F S1
- Observe service information
- Number of Teeth 1
- 160
- Width 1 [mm]
- 25 mm
- Number of Teeth
- 19
- Operating Mode
- Mechanical
- Supplementary Article/Supplementary Info
- do not use sealant
- Supplementary Article/Info 2
- with seal ring
- Number of blades/vanes
- 8
- Water Pump Pulley Diameter [mm]
- 56.23 mm
- Impeller Diameter [mm]
- 63.4 mm
- Water Pump Type
- for timing belt drive
- Water pump impeller material
- Plastic
- Operating Mode
- Electric
- Voltage [V]
- 12 V
- Number of pins
- 3 -pin connector
- Assy./disassy. by qualified personnel required!
- Operating Mode
- Electric
- Voltage [V]
- 12 V
- for OE number
- 7E0 965 561 F
- Operating Mode
- Electric
- Voltage [V]
- 12 V
- for OE number
- 7E0 965 561 D
- Operating Mode
- Electric
- Voltage [V]
- 12 V
- Supplementary Article/Supplementary Info
- with holder
- for OE number
- 7E0 963 417 B
HEPU
P655
Water Pump, engine cooling
Рекомендуємо
- Operating Mode
- Mechanical
- Supplementary Article/Supplementary Info
- with gasket/seal
- Water pump impeller material
- Metal
- Number of Teeth
- 19
- Water Pump Pulley Diameter [mm]
- 56 mm
- Number of blades/vanes
- 7
- Impeller Diameter [mm]
- 64 mm
HEPU
P662
Water Pump, engine cooling
Рекомендуємо
- Operating Mode
- Mechanical
- Supplementary Article/Supplementary Info
- with gasket/seal
- Water pump impeller material
- Metal
- Number of Teeth
- 19
- Water Pump Pulley Diameter [mm]
- 56 mm
- Number of blades/vanes
- 8
- Impeller Diameter [mm]
- 64 mm
HEPU
PK06551
Water Pump & Timing Belt Kit
Рекомендуємо
- Number of belts
- 1
- Width [mm]
- 25 mm
- Number of Teeth
- 160
- Number of tension rollers
- 1
- Number of deflection pulleys
- 3
- Supplementary Article/Info 2
- with bolts/screws
HEPU
PK06621
Water Pump & Timing Belt Kit
Рекомендуємо
- Number of belts
- 1
- Width [mm]
- 25 mm
- Number of Teeth
- 160
- Number of tension rollers
- 1
- Number of deflection pulleys
- 3
- Supplementary Article/Info 2
- with bolts/screws
- Supplementary Article/Supplementary Info
- with camshaft screws
- Manufacturer Restriction
- VAG
- Plug Type ID
- Code A
- Cable Length [mm]
- 175 mm
- Number of pins
- 3 -pin connector
- Cable Cross Section [mm²]
- 0.75 mm²
- Contact surface
- Silver-plated
- Cable insulation material
- Silicone
- Supplementary Article/Supplementary Info
- with gaskets/seals
- Supplementary Article/Info 2
- with pipe
- Temperature range from [°C]
- -25 °C
- Temperature range to [°C]
- +140 °C
- SVHC
- No SVHC present!
- Operating Mode
- Electric
- Voltage [V]
- 12 V
- Number of connectors
- 2
- SVHC
- No SVHC present!
- Operating Mode
- Electric
- Voltage [V]
- 12 V
- Number of connectors
- 3
- SVHC
- No SVHC present!
METELLI
24-1137
Water Pump, engine cooling
Рекомендуємо
- Number of Teeth
- 19
- Operating Mode
- Mechanical
- Supplementary Article/Supplementary Info
- do not use sealant
- Supplementary Article/Info 2
- with seal ring
- Number of blades/vanes
- 8
- Water Pump Pulley Diameter [mm]
- 56.23 mm
- Impeller Diameter [mm]
- 63.4 mm
- Water Pump Type
- for timing belt drive
- Water pump impeller material
- Plastic
METELLI
30-1137-1
Water Pump & Timing Belt Kit
Рекомендуємо
- Number of Teeth 1
- 160
- Width 1 [mm]
- 25 mm
- Supplementary Article/Supplementary Info
- with gasket/seal
- Water Pump Type
- for timing belt drive
- Number of Teeth
- 19
- Quality
- Sealed with SiC/SiC
- New part without deposit
- Article number of the recommended special tool
- 999 990 0002
- Supplementary Article/Supplementary Info
- with gasket/seal
- Water Pump Type
- for timing belt drive
- Number of Teeth
- 19
- reinforced version
- Quality
- Sealed with SiC/SiC
- Water pump impeller material
- Metal
- New part without deposit
- Article number of the recommended special tool
- 999 990 0002
- Housing material
- Stainless Steel
- Chemical Properties
- High temperature-resistant
- Number of Teeth
- 160
- Length [mm]
- 1,524 mm
- Width [mm]
- 25 mm
- Driven Units
- Camshaft
- Number of belts
- 1
- Pulleys contained
- 4
- Connector Shape
- oval
- Inlet Ø [mm]
- 222 mm
- Outlet Ø [mm]
- 222 mm
- Material
- Plastic
- Operating Mode
- Electric
- Plug Type
- Female
- Power [W]
- 18 W
- Voltage [V]
- 12 V
- Connector Shape
- D Shape
- Inlet Ø [mm]
- 222 mm
- Outlet Ø [mm]
- 222 mm
- Material
- Plastic
- Operating Mode
- Electric
- Plug Type
- Male
- Power [W]
- 18 W
- Voltage [V]
- 12 V
- Number of Teeth
- 19
- Operating Mode
- Mechanical
- Impeller Diameter [mm]
- 63.5 mm
- Height [mm]
- 28.5 mm
- Belt Pulley Ø [mm]
- 56 mm
- Number of Teeth
- 19
- Pulleys
- with belt pulley
- Supplementary Article/Supplementary Info
- with gasket/seal
- Number of blades/vanes
- 8
- Number of Teeth
- 160
- Driven Units
- Camshaft
- Width [mm]
- 25 mm
- Number of Teeth
- 160
- Driven Units
- Camshaft
- Width [mm]
- 25 mm
- Operating Mode
- Electric
- Voltage [V]
- 12 V
- Operating Mode
- Electric
- Voltage [V]
- 12 V
- Diameter 1 [mm]
- 20 mm
- Diameter 2 [mm]
- 20 mm
- Water pump impeller material
- Plastic
PIERBURG
7.07152.05.0
Water Pump, engine cooling
Рекомендуємо
- Operating Mode
- Mechanical
- Water pump impeller material
- Plastic
- Supplementary Article/Supplementary Info
- with gasket/seal
- Number of Teeth
- 160
- Width [mm]
- 25 mm
- Driven Units
- incl. water pump
- Supplementary Article/Info 2
- with belt
- Belt Pulley Ø [mm]
- 56.3 mm
- Number of Teeth
- 19
- Impeller Diameter [mm]
- 53.7 mm
- Operating Mode
- Mechanical
- Number of blades/vanes
- 8
- Number of Teeth
- 160
- Width [mm]
- 25 mm
- Driven Units
- incl. water pump
- Supplementary Article/Info 2
- with belt
- Belt Pulley Ø [mm]
- 56.3 mm
- Number of Teeth
- 19
- Impeller Diameter [mm]
- 53.7 mm
- Operating Mode
- Mechanical
- Number of blades/vanes
- 8
- Number of Teeth 1
- 160
- Width 1 [mm]
- 25 mm
- Observe service information
- Follow installation instructions
- SVHC
- No SVHC present!
- Water Pump Type
- for timing belt drive
- Number of Teeth
- 19
- SVHC
- No SVHC present!
- Supplementary Article/Supplementary Info
- with holder
- SVHC
- No SVHC present!
- Connector Shape
- D Shape
- Voltage [V]
- 12 V
- Number of pins
- 2 -pin connector
- SVHC
- No SVHC present!
- Voltage [V]
- 12 V
- Operating Mode
- Electric
- Quality
- GENUINE
- Article number of the recommended special tool
- VKN 1000
- Number of bolts/screws
- 2
- Water pump impeller material
- Plastic
- Belt Width [mm]
- 25 mm
- Supplementary Article/Supplementary Info
- with gaskets/seals
- Supplementary Article/Info 2
- with studs
- Number of Teeth
- 160
- Water Pump Type
- for timing belt drive
- Water pump impeller material
- Plastic
- Supplementary Article/Supplementary Info
- with gaskets/seals
- Number of Teeth
- 19
- Water pump impeller material
- Plastic
- Seal Material
- Rubber
- Material
- Cast Aluminium
- Number of Teeth
- 19
- Number of blades/vanes
- 8
- Weight [kg]
- 0.725 kg
- Supplementary Article/Supplementary Info
- with gasket/seal
- Observe service information
- Width [mm]
- 25 mm
- Number of Teeth
- 160
- Surface
- Coated
- Belts
- with rounded tooth profile
- Weight [kg]
- 2.63 kg
- for OE number
- 03L 198 119 F S1
- Observe service information
- for OE number
- Generation 1.
- Manufacturer Restriction
- PIERBURG
- Operating Mode
- Electric
- Supplementary Article/Supplementary Info
- with water pump
- Observe technical data
- Number of Teeth
- 19
- Water pump impeller material
- Plastic
- Alternatively
- Pulleys contained
- 4
- Number of belts
- 1
- Supplementary Article/Supplementary Info
- with water pump
- Width [mm]
- 25 mm
- Number of Teeth
- 160
- Operating Mode
- Mechanical
- Width [mm]
- 25 mm
- Operating Mode
- Mechanical
- Supplementary Article/Supplementary Info
- with water pump
- Pulleys contained
- 4
- Supplementary Article/Info 2
- with fastening material
- Number of belts
- 1
- Number of Teeth
- 160
- Supplementary Article/Supplementary Info
- with gaskets/seals
- Supplementary Article/Info 2
- with seal ring
- Operating Mode
- Mechanical
- Water pump impeller material
- Metal
- Voltage [V]
- 12 V
- Operating Mode
- Electric
- Supplementary Article/Supplementary Info
- with holder
- Voltage [V]
- 12 V
- Operating Mode
- Electric
- Alternatively
- Article number of recommended accessories
- V99-16-0004
- Voltage [V]
- 12 V
- for OE number
- 7E0 963 417
- Operating Mode
- Electric
- Article number of recommended accessories
- V99-16-0004